[SEL] Need Advice on Cast Part Repair

[Paul Maples]

Thanks John, I am certainly no welder but know a couple of guys who are but 
messing with this old cast is always a gamble at best.

Paul

----- Original Message ----- 
From: "John Hall" <jthall at worldnet.att.net>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Thursday, January 04, 2007 8:17 PM
Subject: Re: [SEL] Need Advice on Cast Part Repair


>I had to build up  couple of the rocker arms on my Titan tractor. I welded 
>them with nickel rod and then belt sanded them back to shape. Best I can 
>recall I didn't bother to preheat since there wasn't any cracks and since 
>the area was so small I wan't generating a lot of heat.
>
> John Hall
>