[SEL] con rod ID

[Tom Dunlap]

Thanks for the response..this rod is exactly 12 inches center to center. 
Pictures of it are at: http://community.webshots.com/user/stellar_jay.




----- Original Message ----- 
From: "Judge Tommy Turner" <lcjudge at scrtc.com>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Wednesday, February 21, 2007 8:36 PM
Subject: Re: [SEL] con rod ID


> Got a photoalong with some dimensions you can post Tom?  Did Aermotor use 
> an A prefix on their parts?  Someone might know.  Hagan did a letter 
> designation (A thru FF) and cast the letters and numbers on their parts. 
> If I see it I can tell you if its Hagan or not.
>
> Tommy Turner
> Magnolia, KY
>
>
>>I have a con rod that i have no idea what engine its made for. Its 
>>obviously from an old stationary engine since it has a grease cup on the 
>>big end. A80 is cast into the side of this rod. Does anyone have an idea?
>>_______________________________________________
>>SEL mailing list
>>SEL at lists.stationary-engine.com
>>http://www.stationary-engine.com/mailman/listinfo/sel
>>
>>
>>
>>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel