[SEL] Mercury outboard motorO/T

[James Mackessy]

Well Ed, looks like the list comes through again! I got stuck at work for 13
hours today, but it looks like the guys took good care of you. I know the
guys at Grubb's will too. Enjoy your Mercury!
Regards;
Jim Mackessy
----- Original Message ----- 
From: "Lyle Myles" <lyle45859 at roadrunner.com>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Tuesday, February 20, 2007 12:23 PM
Subject: Re: [SEL] Mercury outboard motorO/T


> www.oldmercs.com/
> FAX Toll-Free to 1-888-OLD-MERC (fax only, must be within US) or from
> outside US Fax to: 610-495-6868
> Or MAIL it to:
> East Coast Marine Service
> Grubb's Marine Division
> 3363 W. Ridge  Pike
> Pottstown, PA 19464
> Or CALL us at 610-495-7774.
> Here are a few web addresses that may help you in your search for parts.
> Lyle Myles
> -------Original Message------- 
>
> From: Tom Smith
> Date: 02/20/07 11:45:02
> To: The SEL email discussion list
> Subject: Re: [SEL] Mercury outboard motorO/T
>
> Edd,
> It sounds like parts you might be able to fabricate and using a more
> Modern alloy, you might find the parts would last a bit longer.
>
> Good luck,
> Tom
>
> On Tue, 20 Feb 2007 15:22:33 -0000
> "Dave Croft" <dave.croft at ntlworld.com> wrote:
> > ----- Original Message ----- From: "James Mackessy"
> ><jmackess at twcny.rr.com>
> > To: "The SEL email discussion list"
> ><sel at lists.stationary-engine.com>
> > Sent: Tuesday, February 20, 2007 2:29 PM
> > Subject: Re: [SEL] Mercury outboard motorO/T
> >
> >
> >> Edd;
> >> Going back a few years, I think there was a place in Pottstown,
> >> Pennsylvania called Grubb's Marine that specialized in antique
> >>Mercury
> >> parts. He had the coils and water pump impeller for my 1947
> >>"Hurricane 10".
> >> I'll have to dig a little to find the contact info. You may try
> >>searching
> >> for the antique outboard collector's organization, I know they have
> >>a group
> >> and a website somewheres. Tonight when I get a little time I'll hunt
> >>up some
> >> info for you.
> >> Jim Mackessy
> >> ----- Original Message ----- 
> >> From: "Edd Payne" <edsengns at optusnet.com.au>
> >> To: <SEL at lists.stationary-engine.com>
> >> Sent: Tuesday, February 20, 2007 8:10 AM
> >> Subject: [SEL] Mercury outboard motorO/T
> >>
> >>> Hi guys.I am looking for some help regarding the old Mercury
> >>>outboard on my
> >>> sons boat.It is a 1966 950SS in line 6 cylinder 95HP.We are looking
> >>>for
> >>> parts and having no luck at all.The parts needed are the exhaust
> >>>deflector
> >>> plate and water jacket cover plate.These are aluminium castings and
> >>>are
> >>> badly corroded.The rest of the motor is in excellent condition and
> >>>goes real
> >>> good.Do any of you know of any supplier of parts for these old
> >>>outboard's
> >> or
> >>> a maker of repo parts.We have searched the net with no luck up till
> >>>now and
> >>> am hoping there may be some knowledge among you people.
> >>> EDD PAYNE
> >
> > Have a look at http://www.oldmercs.com/
> > Dave Croft
> > Warrington
> > http://oldengine.org/members/croft/homepage
> > http://community.webshots.com/user/crftdv
> >
> >
> > _______________________________________________
> > SEL mailing list
> > SEL at lists.stationary-engine.com
> > http://www.stationary-engine.com/mailman/listinfo/sel
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel