[SEL] Low Tension Coils
Peter Scales
peter at loud-n-clear.net
Sun Feb 18 00:01:28 PST 2007
Kevin
Many thanks for that.
Regards
Pete
--
Peter Scales
> -----Original Message-----
> From: sel-bounces at lists.stationary-engine.com
> [mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of Kevin
> Sent: 17 February 2007 16:28
> To: The SEL email discussion list
> Subject: Re: [SEL] Low Tension Coils
>
> Bill, Francis, Pete, and anyone interested.
>
> ironman
>
> Kevin Mosier
>
> To make a coil from auto junkyard parts.
>
> Get a Bosch (or similar) relay from a newer car,
>
> they are used for accesories.
>
> On the side of it you will see a wiring diagram
>
> with numbers 30, 87, 87a,85, 86.
>
> You will need a auto coil and condenser.
>
> Connect a wire from terminal 85 to the coil positve side.
>
> Connect another wire from terminal 86 to coil negative.
>
> Connect a wire from coil negative to terminal 30.
>
> Connect terminal 87a to contact points on engine
>
> and from there to battery negative.
>
> Connect condenser between terninals 30 and87a
>
> It should be ready to fire.
>
>
>
More information about the sel
mailing list