[SEL] Low Tension Coils

[Tim Christoff]

you can use the transformer out of an old tv set too and you don't have to
buy or rework anything.

Tim Christoff
Basehor Kansas


> [Original Message]
> From: Keith Kinney <kkinney at herculesengines.com>
> To: The SEL email discussion list <sel at lists.stationary-engine.com>
> Date: 2/17/2007 11:33:27 AM
> Subject: Re: [SEL] Low Tension Coils
>
> I'd like a copy too.
> Thanks.
> Keith
>
> At 10:02 PM 2/16/2007, you wrote:
> >Anyone want the recipe to make your own ?
> >ironman
> >Kevin Mosier
> >
> >----- Original Message ----- From: "Charles R Bryant"
<mogul460 at localnet.com>
> >To: <SEL at lists.stationary-engine.com>
> >Sent: Friday, February 16, 2007 9:54 PM
> >Subject: Re: [SEL] Low Tension Coils
> >
> >
> >>Thanks  Ron. I will get in contact with my friend. He is out of town
> >>so it might be a few days. He started making coils about 6 years
> >>ago and makes about 60 a year. He does a real good job. I don't think
> >>he has ever had a single coil returned. We picked up a sewing machine
motor
> >>for winding.
> >>
> >>Charlie
> >>
> >>
> >>----- Original Message ----- From: <rdhaskell at juno.com>
> >>To: <sel at lists.stationary-engine.com>
> >>Sent: Wednesday, February 14, 2007 3:16 PM
> >>Subject: Re: [SEL] Low Tension Coils
> >>
> >>
> >>>Hi Charlie.
> >>>What gauge wire does your friend use?  I might be able to get some at
> >>>close to scrap price.
> >>>
> >>>Ron Haskell
> >>>rdhaskell at juno.com
> >>>Riverside, California
> >>>USA
> >>>http://albums.photo.epson.com/j/AlbumList?u=3009370&f=0
> >>>
> >>>On Wed, 14 Feb 2007 13:47:00 -0600 "Charles R Bryant"
> >>><mogul460 at localnet.com> writes:
> >>> > In the next few months I think we are going to see
> >>> > a big increase in the price of low tension coils. As
> >>> > you know the price of copper has tripled in price this
> >>> > past year or so.My friend in Missouri who for the past
> >>> > several years has been making low tension coils tells
> >>> > me the last copper wire he priced was $20 per pound.
> >>> >  He uses 1 1/4 pounds of copper wire per coil and until
> >>> > last year was selling them for $25 ea. Even though since
> >>> >  then he has increased his price to $30 its going to cost him just
> >>> > for the wire about $26. Another vender who sells his for about $10
> >>> > more was saying even at his price he was selling his for it was not
> >>> >
> >>> > a very profitable venture..
> >>>_______________________________________________
> >>>SEL mailing list
> >>>SEL at lists.stationary-engine.com
> >>>http://www.stationary-engine.com/mailman/listinfo/sel
> >>>
> >>>
> >>>
> >>>--
> >>>Internal Virus Database is out-of-date.
> >>>Checked by AVG Free Edition.
> >>>Version: 7.5.432 / Virus Database: 268.17.8/649 - Release Date: 1/23/07
> >>8:40 PM
> >>>
> >>
> >>_______________________________________________
> >>SEL mailing list
> >>SEL at lists.stationary-engine.com
> >>http://www.stationary-engine.com/mailman/listinfo/sel
> >
> >_______________________________________________
> >SEL mailing list
> >SEL at lists.stationary-engine.com
> >http://www.stationary-engine.com/mailman/listinfo/sel
> >
> >
> >
> >--
> >No virus found in this incoming message.
> >Checked by AVG Free Edition.
> >Version: 7.5.441 / Virus Database: 268.18.1/690 - Release Date: 
> >2/16/2007 2:25 PM
>
> Keith Kinney
> Evansville, Indiana  USA
> www.HerculesEngines.com 
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.412 / Virus Database: 268.18.1/691 - Release Date: 2/17/2007