[SEL] Need Used Vertical Metal Bandsaw

[Paul Maples]

Thanks Rob I will check this out.

Paul

----- Original Message ----- 
From: "Rob Skinner" <rskinner at rustyiron.com>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Sunday, August 19, 2007 9:47 PM
Subject: Re: [SEL] Need Used Vertical Metal Bandsaw


> 
> On Aug 19, 2007, at 7:18 PM, Bob Willman wrote:
> 
>> You too. I have been looking for one for several years. They don't
>> seem to be reasonably priced unles it is a basket case.
> 
> Harbor Freight has a small bandsaw for under $200.  The consensus is  
> that it's junk (like any other HF product) and requires some repairs  
> right out of the box to make it usable.  But if you're willing to  
> rebuild an old junker anyway, the HF unit might be a good place to  
> start.
> 
> Rob
___________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel