[SEL] Fuel Pump Seat Leaking

[Paul Maples]

Thanks Elden.

Paul

----- Original Message ----- 
From: "Elden DuRand" <edurand at mchsi.com>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Friday, April 13, 2007 7:29 AM
Subject: Re: [SEL] Fuel Pump Seat Leaking


> Paul:
>
> If the pump housing is brass, you could try dropping the ball into the 
> seat and then, using a soft (brass) punch, tap it with a hammer.  If the 
> seat isn't too bad, the ball will impress it's shape on the brass and 
> you're back in business.
>
> Take care - Elden
> edurand at mchsi.com
> http://www.oldengine.org/members/durand
>