[SEL] Casting Demo

[Ed stoller]

Thank you Paul,

----- Original Message ----- 
From: "Paul Pavlinovich" <pjp at steamengine.com.au>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Tuesday, September 12, 2006 9:01 AM
Subject: Re: [SEL] Casting Demo


> Ed, You can find a similar process where you will see pictures of the sand 
> moulds being made on my site:
> http://www.steamengine.com.au/misc/forge/green-sand/index.html
>
> Paul
>
> Ed stoller wrote:
>> Just prior to the Portland, Ind. Show, the Glassford family hosted a 
>> demonstration of making some castings. I posted some pictures on my site 
>> below. The main part for me was making the molds of sand. I had never 
>> seen this before and was too busy watching and listening to take 
>> pictures. I want to thank the whole family, especially the little grand 
>> daughter serving cookies.
>>
>> John can use old Briggs and I assume Kohler and Tecumseh blocks for the 
>> cast iron. I don't think he would turn down scrap aluminum and brass 
>> either. I want to save mine to take to them next year.
>>
>> Thank you all at Grandpa's Casting Co. 1-888-271-6696 
>> http://home.earthlink.net/~edstoller/id18.html
>>
>>
>>
>> Ed Stoller
>> New Fairfield, CT
>> http://home.earthlink.net/~edstoller/ 
>> _______________________________________________
>> SEL mailing list
>> SEL at lists.stationary-engine.com
>> http://www.stationary-engine.com/mailman/listinfo/sel
>>
>
> -- 
>
> pjp at steamengine.com.au
> Emerald, Victoria, Australia
> www.steamengine.com.au
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel