[SEL] Quik Poly or XP 2000

[Curt]

Rob, Lyle, Dave, Damian,
Thank you for the update on KwikPoly. Seems they added the llc to the 
end of the old URL.
I'll give 'em a call today.
Curt

Lyle Myles wrote:

>Do you have any thing lying around like a can or box this came in? if you do
>maybe there is an address on this for the company and if so you could call
>information and see if the business is still in operation and then if they
>are you can give them a call and see if they still sell this or if they have
>replaced it with something else. Also folks sometimes forget the Better
>Business Bureau can also give you information on companies if they are still
>in business or not. Hope this might help some.
>
>Lyle Myles
>
>May the Lord be with each and everyone this beautiful day that the Lord has
>given each and every one of us to enjoy and behold!
>
> 
>
>
>-----Original Message-----
>From: sel-bounces at lists.stationary-engine.com
>[mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of Curt
>Sent: Thursday, August 31, 2006 2:55 PM
>To: SEL; SEL (Oldengine.org)
>Subject: [SEL] Quik Poly or XP 2000
>
>Whatever became of the Kwik Poly, 2 part, water thin epoxy used to seal 
>fuel tanks? For a while it was sold under the XP 2000 name, but I can't 
>find either name on the 'net anymore. Mine finally set up after sitting 
>around a few years. I had used about 2/3 of the quart kit. It's good 
>stuff and I'd like to replace it.
>Curt Holland
>Gastonia, NC
>_______________________________________________
>SEL mailing list
>SEL at lists.stationary-engine.com
>http://www.stationary-engine.com/mailman/listinfo/sel
>
>
>_______________________________________________
>SEL mailing list
>SEL at lists.stationary-engine.com
>http://www.stationary-engine.com/mailman/listinfo/sel
>
>
>  
>