[SEL] Gib Key Removal

[Dave Croft]

Hi Paul, When using my homemade wedge remover I usually
lock it down lightly with a G clamp  close to the key so it can't twist.
(Not too hard, just enough for it to slide)
Dave Croft
Warrington
http://oldengine.org/members/croft/homepage
http://community.webshots.com/user/crftdv
----- Original Message ----- 
From: "Paul Maples" <paulmaples at sbcglobal.net>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Thursday, October 26, 2006 1:13 PM
Subject: Re: [SEL] Gib Key Removal


> Thanks Rick, I will check and see if the local New Holland dealer has one, 
> don't hurt to try.
> 
> Paul
> 
> ----- Original Message ----- 
> From: "Richard Strobel" <Richard_Strobel7 at msn.com>
> To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
> Sent: Thursday, October 26, 2006 6:59 AM
> Subject: Re: [SEL] Gib Key Removal
> 
> 
>> Paul, here's two made by New Holland with p/n's.  Not sure if they're 
>> still available...maybe you have a dealer close.
>>
>> http://image22.webshots.com/22/5/7/14/201050714CJPfMF_fs.jpg
>>
>> Good Luck,
>> RickinMt.
> 
> 
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel