[SEL] Oil bath air filter help needed

[cgandree at mchsi.com]

Thanks George for the offer, but yesterday I acquired some very heavy duty 
furnace filter material, rolled it up and stuffed it back in the housing and 
she works great.
regards,
Curt


> Curt,
>   I have the whole air cleaner system from an luc engine.  I'll look at it
> tomorrow and if it looks good on the inside you can have the complete item.
> The paint is good on the outside so I expect it to look well inside the
> cannister.   George
> -----Original Message-----
> From: cgandree at mchsi.com <cgandree at mchsi.com>
> To: Old eng list <stationary-engine at oldengine.org>; SEL Lists
> <sel at lists.stationary-engine.com>
> Date: Monday, October 02, 2006 5:26 AM
> Subject: [SEL] Oil bath air filter help needed
> 
> 
> >Need some help with rebuilding a oil bath air filter on my JD LUC engine.
> It
> >seems that while in storage the extension hose attached to the carb was
> left
> >laying off and mice built one heck of a nest inside.  While taking the unit
> >apart discovered that lots of debrie is now imbeded in the "steel wool"
> like
> >filter material making it almost imposible to clean out.  What can I use in
> >place of or does any one know where I can get that type of material?
> >thank you in advance,
> >Curt Andree
> >_______________________________________________
> >SEL mailing list
> >SEL at lists.stationary-engine.com
> >http://www.stationary-engine.com/mailman/listinfo/sel
> 
> 
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel