[SEL] Oil bath air filter help needed

[cgandree at mchsi.com]

Elden,
yes, already got all the rusty deteriorated material out and your idea might 
be a good one too.
thanks,
Curt


> Curt:
> 
> If you can get at it, fish out all the old filter material.  It's probably quite 
> similar to a pot scrubbing pad, one of the bronze looking ones you can get at a 
> supermarket.  Stuff in the new stuff and you're good to go.
> 
> .........I'll never tell!
> 
> Take care - Elden
> edurand at cybertron.com <mailto:edurand at cybertron.com> 
> 
> http://home.cybertron.com/~edurand
> 
> > -----Original Message-----
> > From: sel-bounces at lists.stationary-engine.com
> > [mailto:sel-bounces at lists.stationary-engine.com]On
> >  Behalf Of
> > cgandree at mchsi.com
> > Sent: Monday, October 02, 2006 05:12 AM
> > To: Old eng list; SEL Lists
> > Subject: [SEL] Oil bath air filter help needed
> > 
> > 
> > Need some help with rebuilding a oil bath air 
> > filter on my JD LUC engine.  It 
> > seems that while in storage the extension hose 
> > attached to the carb was left 
> > laying off and mice built one heck of a nest 
> > inside.  While taking the unit 
> > apart discovered that lots of debrie is now 
> > imbeded in the "steel wool" like 
> > filter material making it almost imposible to 
> > clean out.  What can I use in 
> > place of or does any one know where I can get 
> > that type of material?
> > thank you in advance,
> > Curt Andree
> 
> 
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel