[SEL] More Stover Restoration Pictures

[Paul Maples]

For you folks who are following along with me on the Stover restoration I have added some more pictures. The new pictures are close up pictures of the governor gear, governor sleeve and cam assembly. I originally had some questions as to how far apart this assembly would come but after the clean up and blasting it became obvious that the Governor Gear, Governor Sleeve and Can was all one assembly as the pictures will show. Also the new pictures show the final sandblasting of the block and the priming of the block. Open this album and then use the "Skip to Photo" option and arrow down to picture #274 to start with the new pictures:

WARNING: This album contains over 300 pictures in is so if you have dial up you will probably want to skip it.

http://community.webshots.com/slideshow?ID=554884600&key=StYIhb

Paul