[SEL] Falk piston core box and pattern update.

Rick Rowlands jrrowlands at neo.rr.com
Tue Mar 7 03:47:45 PST 2006


How do you intend to put in that little projection which is located 90 
degrees from the pin bosses?  Are you going to put a loose piece in the 
corebox?

Rick Rowlands
Tod Engine Works
Makers of Quality iron, steel, ductile iron
and nonferrous castings
2261 Hubbard Road
Youngstown, OH  44505
330-728-2799
Fax 330-759-1524
www.todengine.org/engineworks.html

----- Original Message ----- 
From: "Dave Otto" <dotto at velocitus.net>
To: "'The SEL email discussion list'" <sel at lists.stationary-engine.com>
Sent: Monday, March 06, 2006 10:11 PM
Subject: [SEL] Falk piston core box and pattern update.


> Hi Everyone
>
> I have been able to make a little more progress on my first venture into
> pattern making. I'm not quite as quick as Curt but I have been slowly 
> making
> progress.
>
> I also have been working on two patterns for rocker arms that are for the
> same engine. I will try to get some rocker arm pictures up in a few days.
>
> Here are the new pictures.
>
> http://community.webshots.com/photo/547573772/2625602120053545466CiAZxW
>
> http://community.webshots.com/photo/547573772/2970552700053545466xlaeTt
>
> http://community.webshots.com/photo/547573772/2894963720053545466SKvrEb
>
> http://community.webshots.com/photo/547573772/2224775200053545466srJAZn
>
> http://community.webshots.com/photo/547573772/2225423450053545466eoSQrd
>
> http://community.webshots.com/photo/547573772/2512113440053545466vbjzGf
>
> http://community.webshots.com/photo/547573772/2042633760053545466JyAEBh
>
>
> Dave
>
>
>
> Dave Otto
> Boise, Idaho
> USA
> dotto at velocitus.net
> http://community.webshots.com/user/otto1960
>
>
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel 




More information about the sel mailing list