[SEL] Cushman R-12 Information Needed

Tue Jun 13 20:19:54 PDT 2006

These web sites may give you some where to look for information.
www.hitnmiss.com , www.classiccushmanscooters.com , www.nebraskahistory.org
. They may not have the information that you need but may be able to direct
you in the right direction to find the information you need if it is out
there to be found. Have a good day.

Lyle Myles

May the Lord be with each and everyone this beautiful day that the Lord has
given each and every one of us to enjoy and behold!

-----Original Message-----
From: sel-bounces at lists.stationary-engine.com
[mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of
FRM8198 at aol.com
Sent: Tuesday, June 13, 2006 9:56 PM
To: SEL at lists.stationary-engine.com
Subject: [SEL] Cushman R-12 Information Needed

Hi List,
I have finally determined that I have a Cushman R-12.  It has  12" x 2" 
flywheels.  I need to know if I have an engine with the serial  number above
or 
below 66,000.  Since the inspection plate with name  tag is missing, I don't
the 
serial number.  Is there any other way to  determine serial number without 
having the inspection plate with name  tag?
The engine came without a carburetor (thread type), inspection  plate, or 
magneto.  

Francis  Maciel
Santa Maria, CA

-------------------------------1150250158
Content-Type: text/html; charset="US-ASCII"
Content-Transfer-Encoding: quoted-printable

<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML><HEAD>
<META http-equiv=3DContent-Type content=3D"text/html; charset=3DUS-ASCII">
<META content=3D"MSHTML 6.00.2900.2873" name=3DGENERATOR></HEAD>
<BODY id=3Drole_body style=3D"FONT-SIZE: 10pt; COLOR: #000000;
FONT-FAMILY:=20=
Arial"=20
bottomMargin=3D7 leftMargin=3D7 topMargin=3D7 rightMargin=3D7><FONT
id=3Drol=
e_document=20
face=3DArial color=3D#000000 size=3D2>
<DIV><STRONG>Hi List,</STRONG></DIV>
<DIV><STRONG>I have finally determined that I have a Cushman R-12. 
It=20=
has=20
12" x 2" flywheels.  I need to know if I have an engine with the
serial=
=20
number above or below 66,000.  Since the inspection plate with name=20
tag is missing, I don't the serial number.  Is there any other
way=
 to=20
determine serial number without having the inspection plate with
name=20
tag?</STRONG></DIV>
<DIV><STRONG>The engine came without a carburetor (thread type),
inspection=20
plate, or magneto.=20
<DIV> </DIV>
<DIV><FONT lang=3D0 face=3DArial size=3D2 FAMILY=3D"SANSSERIF"
PTSIZE=3D"10"=
><B>Francis=20
Maciel<BR>Santa Maria,
CA</B></FONT></DIV></STRONG></DIV></FONT></BODY></HTM=
L>
_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel