[SEL] From a newsgroup: Lookin For: Crank for 1.5hp Economy

[Glenn A Karch]

Steve,

If you have to yank on the flywheels very much, something else needs fixing.

Glenn Karch
Haubstadt, IN, USA
Hercules Historian

----- Original Message -----
From: "Steve W." <falcon at telenet.net>
To: "Engine list" <sel at lists.stationary-engine.com>
Sent: Tuesday, January 24, 2006 9:28 PM
Subject: [SEL] From a newsgroup: Lookin For: Crank for 1.5hp Economy


> ----- Original Message -----
> From: "Steve Mulhollan" <smulholl at yahoo.com>
> Newsgroups: rec.crafts.metalworking
> Sent: Monday, January 23, 2006 8:22 PM
> Subject: Lookin For: Crank for 1.5hp Economy
>
>
> > I'm looking for a starting crank for a 1-1/2 HP Economy hit-and-miss
> > engine. It has a 1-1/4" shaft with a 5/16" keyway. If somebody has one
> > or can point me in the right direction to find one it would be greatly
> > appreciated. Yanking on the flywheel to start it is getting old fast!
> >
> > Thanks.
> >
> > Steve
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>