[SEL] Stover Help

[peter ogborne]

Dare I suggest that it might take a bit of cranking..........I don't want to 
start the thread re cranking and how to hold your hand!
----- Original Message ----- 
From: "Tom Dunlap" <tdunlap at satx.rr.com>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Friday, February 03, 2006 3:35 AM
Subject: Re: [SEL] Stover Help


>I have a ring compressor that might squash those rings right down to size!! 
>Its just the compression isnt very good afterwards...
>
>
>
> ----- Original Message ----- 
> From: "Dave Rotigel" <rotigel at alltel.net>
> To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
> Sent: Thursday, February 02, 2006 1:12 PM
> Subject: Re: [SEL] Stover Help
>
>
>> At 06:19 AM 2/2/2006, you wrote:
>>>If anyone can help Stan. Please do so directly.
>>>
>>>Duncan
>>>
>>>Anybody out there that may know something about a Stover K 8hp--- has a 
>>>E331 mixer (carb?) just wonderring what kind of fuel it supposed to run 
>>>on? Has a 6 3/4 bore piston has 8 1/4 " rings!! probably kerosene--also 
>>>need info on that engine type how to start it--thanks SOOO much!
>>>gastzt at aol.com
>>
>> Boy Duncan, I'm not sure anyone could help much on an engine with "a 6 
>> 3/4 bore" and "81/4" rings!"
>>         Dave
>> _______________________________________________
>> SEL mailing list
>> SEL at lists.stationary-engine.com
>> http://www.stationary-engine.com/mailman/listinfo/sel
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>
>