[SEL] Help - Need Stover Part

[Paul Maples]

I agree that a good machinist could make this if I just can fine the right 
part to get the drawing and dimension off of. Thanks

Paul

----- Original Message ----- 
From: "Andrew" <tech at andrew2.netpluscom.com>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Monday, August 28, 2006 9:45 PM
Subject: Re: [SEL] Help - Need Stover Part


> Hi Paul,
> If you could come up with the dimensions it looks like one could be made
> fairly easily.
> Andrew.