[SEL] Help - Need Stover Part

[Paul Maples]

Mark what I have learned is that Stover used a lot of different 
configurations for the latch arm so it is quite possible that the latch 
might work. My latch has to pivot from one end and have an offset in the arm 
as shown in the picture. Thanks for the reply.

Paul

----- Original Message ----- 
From: "Mark Shulaw" <frappi at wcoil.com>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Monday, August 28, 2006 8:16 PM
Subject: Re: [SEL] Help - Need Stover Part


> Hi Paul, Would a horizontal 2? hp Y model Stover use the same latch? Mark
>
> At 07:19 PM 8/28/06, you wrote:
>>Folks a couple of years ago I tried in vain to find a Intake Lock Out arm 
>>(Sometime called a fuel saver) for my 1905 Stover and never found anyone 
>>who had the right latch. This picture represents what I believe is the 
>>right latch arm I need:
>>
>>http://community.webshots.com/photo/87694314/1088097993049103604waQDjh