[SEL] Stover "w" mixer needle

[Tom Dunlap]

Thanks for the info...



Tom  
TEXAS, USA

----- Original Message ----- 
From: "Arnie Fero" <fero_ah at city-net.com>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Thursday, April 27, 2006 12:18 PM
Subject: Re: [SEL] Stover "w" mixer needle


> Hi Tom,
> 
> One suggestion would be to take your mixer to the larger shows (like
> Coolspring & Portland) that are attended by the parts guys (Starbolt,
> Pederson, etc. for new and guys like Kenny Meeks for used).
> 
> There are both repro and used mixer needles out there.  Try some and see
> if you find one that fits.  Worst case, find someone with the engine and
> have them do a dimensioned sketch of the needle.  You should be able to
> find someone who would make some chips for a fellow engine man.
> 
> Good luck.
> 
> See ya,  Arnie
> 
> Arnie Fero
> Pittsburgh, PA
> fero_ah at city-net.com
> 
> On Thu, 27 Apr 2006, Tom Dunlap wrote:
> 
>> I need a needle for the mixer on my stover 3 HP model W  .. mine is
>> gone.... what might work, or does anyone have one to sell?
> 
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel