[SEL] Fodder Chopper pictures for Paul Maples

[Paul Maples]

Ken this look just like my fodder  and now I know what I am looking for 
...the flywheel. Thanks to your measurements I now have something to go by 
and I will start trying to find one of these wheels so my chopper will be 
complete. Thanks so much for sending me the pictures and for the help, it is 
greatly appreciated.

Paul

----- Original Message ----- 
From: "Ken Erman" <Ken.Erman at mastercam.com>
To: <sel at lists.stationary-engine.com>
Sent: Monday, April 10, 2006 6:04 AM
Subject: [SEL] Fodder Chopper pictures for Paul Maples


Paul,

 Here are a few pictures of my fodder chopper.  The flywheel is about 24
inches in diameter and the diameter of the outer edge of the flywheel is
about 1 3/4 inches.  I didn't write the numbers down because i thought
they would show up in the pictures.  They didn't come out too well but i
can get them if you need them.

http://community.webshots.com/photo/32992164/2217856420034927251peYswW

Ken Erman