[SEL] Heat Treating Metal
R & M Ingold
randmingold at hotkey.net.au
Tue Sep 6 22:15:27 PDT 2005
This came in as I sent off my reply!!
Reg & Marg Ingold.
Newcastle, NSW, Australia.
randmingold at hotkey.net.au
http://www.oldengine.org/members/randmingold
----- Original Message -----
From: "Rob Skinner" <rskinner at rustyiron.com>
To: "'The SEL email discussion list'" <sel at lists.stationary-engine.com>
Sent: Wednesday, September 07, 2005 3:11 PM
Subject: RE: [SEL] Heat Treating Metal
>
>> I need to make this out of some type material that I can
>> heat treat to make it really hard. Do any of you know of a type of
>> material that I can redily machine but then heat treat (on my own) to
>> make it super tough? I used to have some type material here that was
>> about 1/8 by one inch.
>
> Hi Tommy,
> Kasenit might solve your problem. It's a powdery substance in which coat
> the
> heated part, heat it again, and quench.
>
> Kasenit is available from McMaster-Carr. Here's a web page that tells a
> little
> about the process:
> http://members.aol.com/illinewek/faqs/case.htm
>
> Rob
>
>
>
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>
More information about the sel
mailing list