[SEL] Fairbanks Morse ZD Cracked Block - Best Way to Repair

[Germoamer at aol.com]

In a message dated 9/4/2005 10:52:38 AM Eastern Daylight Time, 
FRM8198 at aol.com writes:

<< Do you still have to drill stress  relief holes 
 at each end of the crack? >>

Francis,

No, the holes at the end of the crack are to eliminate additional cracking 
due to applied heat from welding/brazing. 

Tom Schmutz
Concord, Va. USA
Germoamer at aol.com