[SEL] Fairbanks Morse

R and E Freeman plb at iinet.net.au
Thu Oct 27 03:02:46 PDT 2005


Thanks all,my guess now is a combination of compensator spring and weak
spark. The fuel supply is OK. Getting heaps of fuel up into the mixer. The
spark was weak so the mag needs some attention.
Ray Freeman

-----Original Message-----
From: sel-bounces at lists.stationary-engine.com
[mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of Curt
Sent: Thursday, 27 October 2005 2:11 AM
To: The SEL email discussion list
Subject: Re: [SEL] Fairbanks Morse

Bill,
I would order a new compensator spring from Starbolt or Hit and Miss. A 
spring too stiff will make the mixture too rich and impossible to set 
the mix right. Eliminate that variable with the new spring. Then you are 
down to check valve and mixture control. How does the taper on the 
needle valve look?
Curt Holland
Gastonia, NC


>
>Bill
>
>-----Original Message-----
>From: sel-bounces at lists.stationary-engine.com
>[mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of Ray
>Freeman Portable Line Boring
>Sent: Wednesday, October 26, 2005 7:42 AM
>To: 'The SEL email discussion list'
>Subject: [SEL] Fairbanks Morse
>
>I been working tonight on a 6 HP Fairbanks Morse Z. It had a problem
>with
>blowing head gaskets and we have machined the block face and the head.
>The
>head went back on tonight and that part of the restoration is OK. The
>problem is that it runs but only barely. It seems to be a fuel problem.
>It
>will only run by choking by covering the intake with a hand. The mixer
>gasket is sealing. The compensator appeared to have to weak a spring so
>we
>stiffened that with slight improvement. It does not fire regularly and
>is
>running far to rich and if the mixture is leaned off it will not run at
>all.
>Any help to sort this out will be appreciated.
>Ray Freeman
>_______________________________________________
>SEL mailing list
>SEL at lists.stationary-engine.com
>http://www.stationary-engine.com/mailman/listinfo/sel
>
>_______________________________________________
>SEL mailing list
>SEL at lists.stationary-engine.com
>http://www.stationary-engine.com/mailman/listinfo/sel
>
>
>  
>

_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel



More information about the sel mailing list