[SEL] New Way update

[Richard Strobel]

Thanks Tim..that confirms what I had ass-u-med <vbg>

Rick


----- Original Message ----- 
From: "Tim Christoff" <tchristoff at earthlink.net>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Sunday, October 16, 2005 9:10 PM
Subject: Re: [SEL] New Way update


> Simple, remove the pin that holds the lock out arm in place and then
> unscrew the bracket that held the lock out arm.  It is a right hand 
> thread.
> Once unscrewed, the cover will come off and there's your gear.
>
> Tim
>
>
>
> > Ok..great Tim...after I pull the rod cap the whole top end is going into
> the
> > electrolysis bath for awhile.
> >
> > I ordered a book today..so that might help in me not becoming an a$$.
> >
> > My next question is how to I get at the cam gear..but won't ask that 
> > now.
> > :-))..unless one is in a typing mood.
> >
> > Thanks much
> > Rick
>
>
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>