[SEL] New Way update

[Richard Strobel]

Ok..great Tim...after I pull the rod cap the whole top end is going into the 
electrolysis bath for awhile.

I ordered a book today..so that might help in me not becoming an a$$.

My next question is how to I get at the cam gear..but won't ask that now. 
:-))..unless one is in a typing mood.

Thanks much
Rick


----- Original Message ----- 
From: "Tim Christoff" <tchristoff at earthlink.net>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Sunday, October 16, 2005 1:33 PM
Subject: RE: [SEL] New Way update


>
> Rick
>
> Now, before you do anymore of that ass-u-me stuff you might want to know
> that when you go to put that big old pipe wrench on the intake valve cage
> your going to want to do some soaking first.  The valve cage is threaded 
> up
> on top, you can see that but what you don't see is that it is also 
> threaded
> down at the bottom and if the top comes loose and the bottom doesn't then
> you can guess what will happen.
>
> Tim Christoff
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>