[SEL] Old style nuts and bolts needed

[peter ogborne]

Try China!
----- Original Message ----- 
From: "Judge Tommy Turner" <lcjudge at scrtc.com>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Tuesday, November 29, 2005 5:04 AM
Subject: Re: [SEL] Old style nuts and bolts needed


> Curt,
>
>    The 3/8 heavy nuts are pretty cheap.  A box of 50 cost about $6 
> (without shipping) from McMaster Carr.  The bolts were different prices 
> depending on the length.  A 3/8 x 2 high crown bolt would probably cost 
> about $2.00 to $2.50.  Can't get 'em any more though.
>
> Tommy Turner
> Magnolia, KY
>
>
>
>>Thanks Tommy for telling about the proper name for the big nuts (2H). 
>>Knew there was a name for em but couldn't remember.  So what kind of big 
>>bucks did you have to pay for like a 3/8" thread size????
>>Curt Andree
>>
>>
>>
>>>Curt and Steve,
>>>
>>>    Cook Enterprises used to make the high crown bolts in several sizes. 
>>> But, I contacted them about 3 months or so ago and they told me they had 
>>> stopped.  The lady I chatted with stated that most people that ordered 
>>> them complained that the price was too high and they got tired of 
>>> listening to it.  I ordered several from them and was very pleased with 
>>> the quality.  They were expensive but I couldn't sit at a lathe and make 
>>> them for what they charged for them.  The heavy nuts can be acquired 
>>> from McMaster Carr.  You have minimum quanties that you have to order. 
>>> I think that Hit and Miss Enterprises (they advertise on Harry's) has 
>>> them in any quantity you desire.  They are called "2H" nuts.
>>>
>>>Tommy Turner
>>>Magnolia, KY
>>>
>>>
>>>
>>>
>>>>Curt, I have used Cook Enterprises in Erlanger Ky.     Ph. 859 282 7545 
>>>>They used to advertise in GEM.  Steve
>>>>
>>>>
>>>>
>>>>>From: cgandree at mchsi.com
>>>>>Reply-To: The SEL email discussion list 
>>>>><sel at lists.stationary-engine.com>
>>>>>To: sel at lists.stationary-engine.com (SEL Lists)
>>>>>Subject: [SEL] Old style nuts and bolts needed
>>>>>Date: Sun, 27 Nov 2005 20:07:20 +0000
>>>>>
>>>>>Some where I saw an ad that they were remaking the old style nuts and 
>>>>>bolts
>>>>>for our engines.  Need a few for completing my Sandwich engine
>>>>>thankyou in advance,
>>>>>Curt Andree
>>>>>_______________________________________________
>>>>>SEL mailing list
>>>>>SEL at lists.stationary-engine.com
>>>>>http://www.stationary-engine.com/mailman/listinfo/sel
>>>>>
>>>>
>>>>_______________________________________________
>>>>SEL mailing list
>>>>SEL at lists.stationary-engine.com
>>>>http://www.stationary-engine.com/mailman/listinfo/sel
>>>>
>>>>
>>>>
>>>_______________________________________________
>>>SEL mailing list
>>>SEL at lists.stationary-engine.com
>>>http://www.stationary-engine.com/mailman/listinfo/sel
>>>
>>_______________________________________________
>>SEL mailing list
>>SEL at lists.stationary-engine.com
>>http://www.stationary-engine.com/mailman/listinfo/sel
>>
>>
>>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>
>