[SEL] governor

[Alan]

Hi Evan 

Thanks for info
The engine is a 126 I don't see an "a" after that
The linkage was spot welded, and brazed after it came adrift 
It has a linkage on the carby that take it to idle when you push on the
bottom button and to run on the top button 

Alan


-----Original Message-----
From: sel-bounces at lists.stationary-engine.com
[mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of Evan Doherty
Sent: Friday, May 20, 2005 6:40 PM
To: The SEL email discussion list
Subject: Re: [SEL] governor

Hi Alan
Is the engine a type 122 or126a ?
The VW instruction manual seems to show 2 types of governor, one with an
eccentric and spiral spring on the side of the gov opposite the vertical
long lever that goes to the carb, and a gov that has that side blanked off.
Maybe the gov has been preset for generator use and looking at your photo,
it looks like the linkage to the carb is brazed to the vertical rod ???,
there should be a ball joint there.
Regards
Evan


_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel