[SEL] Buzacott Pulley

[David Nicolson]

Nice job Patrick, i agree a pulley gives an engine that finished look and 
shows the public how they were used to drive the various equipment they were 
designed to drive. Dave

>From: "Patrick M Livingstone" <pml1 at bigpond.net.au>
>Reply-To: The SEL email discussion list <sel at lists.stationary-engine.com>
>To: "Stationary Engine ATIS List" <sel at lists.stationary-engine.com>,        
>"Stationary Engine Mailing List" <stationary-engine at oldengine.org>
>Subject: [SEL] Buzacott Pulley
>Date: Thu, 12 May 2005 13:01:40 +1000
>
>Just to prove that there is still life in the engine world  ;)
>Last weekend I finally finished painting the pulley for my 5.5hp Buzacott
>and fitted it to the engine:
>http://www.oldengine.org/members/pml/myengines/buzacott/05050802.JPG
>It finishes off the engine nicely.
>I also did some investigation into my Massey-Harris is not governing
>properly and found that it has a butterfly that is not sealing properly. A
>job for another day.
>http://www.oldengine.org/members/pml/myengines/mh/05050803.JPG
>
>
>Patrick M Livingstone
>Leichhardt NSW
>http://www.oldengine.org/members/pml/Index.html
>http://www.users.bigpond.com/pml/
>
>
>_______________________________________________
>SEL mailing list
>SEL at lists.stationary-engine.com
>http://www.stationary-engine.com/mailman/listinfo/sel

_________________________________________________________________
SEEK: Over 80,000 jobs across all industries at Australia's #1 job site.    
http://ninemsn.seek.com.au?hotmail