[SEL] Generator hookup

Richard Strobel Richard_Strobel7 at msn.com
Wed May 11 12:04:46 PDT 2005


Ok..got it Jim ..thanks
Rick
PS: why does your name sound so familiar?  Did I buy something from you or ?








----- Original Message ----- 
From: "Jim Dragoset" <Jdragoset at galvotec.com>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Wednesday, May 11, 2005 12:38 PM
Subject: RE: [SEL] Generator hookup


> Rick,
> The twelve volt external excitation may just give you the voltage you're
> looking for.
> Keep in mind that a given DC generator voltage output is proportional to
> both
> field current and RPM's.
> Jim
>
> -----Original Message-----
> From: sel-bounces at lists.stationary-engine.com
> [mailto:sel-bounces at lists.stationary-engine.com]On Behalf Of Richard
> Strobel
> Sent: Wednesday, May 11, 2005 10:01 AM
> To: The SEL email discussion list
> Subject: Re: [SEL] Generator hookup
>
>
> Thanks Jim..that was very helpful.  I understand what you're talking 
> about.
>
>   As 250VDC is a very undesirable voltage, can I not hookup..say a 24vdc
> carbon pile regulator and get the output down to a decent regulated 24vdc.
>   Just possibly the control panel for this gal is still up at the silver
> mine, which would be the ultimate.
>
>   Another oddity about the generator is that the brushes do NOT have any
> braided wire attached to them.  Personally I don't like this and hopefully
> can replace them.
>
>   It would look and perform better with 8 brushes and holders..will look
> into fabriating 4 more.
>
>   I also think I know who's got a megger.
>
> Thanks much for the reply
> RickinMt.
>
>
> ----- Original Message -----
> From: "Jim Dragoset" <Jdragoset at galvotec.com>
> To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
> Sent: Wednesday, May 11, 2005 8:42 AM
> Subject: RE: [SEL] Generator hookup
>
>
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
> 



More information about the sel mailing list