[SEL] Wisconsin help

[ivan]

Bill ,      I think it is .         I dont see any slot or indentations in
the end to make me beleive that its a setscrew . I've used a big wrench
already to try to turn it ,including a couple taps to try to jar it ,nothing
.   Ivan
----- Original Message ----- 
From: "Bill Boyce" <bboyce at swat.coop>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Sunday, May 01, 2005 4:31 PM
Subject: Re: [SEL] Wisconsin help


> ivan, are you sure its a through pin ? the rope pulleys on all my
wisconsins
> are threaded onto the crank, right hand threads,,
> bill boyce
> lost prairie, arkansas
>
> >I need to replace the starter pully on a wisconsin AEH . I have one on a
> > parts engine , but cant get the pin out . Whats the trick ?  Is it a
> > tapered
> > pin ? I've shot it with PB Blaster, pounded on it with a pin punch to no
> > avail . I dont want to get out the bfh and risk bending the crank ,but
its
> > tight . Thanks ,Ivan
> >
> >
> > _______________________________________________
> > SEL mailing list
> > SEL at lists.stationary-engine.com
> > http://www.stationary-engine.com/mailman/listinfo/sel
> >
> >
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>