[SEL] Petter Gib Key Update - Need Help!!!

[Paul Maples]

Peter can you fly down and drill this booger out for me??

Paul

----- Original Message ----- 
From: "Listerdiesel" <listerdiesel at gmail.com>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Wednesday, March 30, 2005 3:28 PM
Subject: Re: [SEL] Petter Gib Key Update - Need Help!!!


> On Wed, 30 Mar 2005 14:46:11 -0600, Paul Maples
> <paulmaples at sbcglobal.net> wrote:
>> Ok gang I have went from bad to worse on trying to remove the gib key 
>> from the little Petter Engine. Since I have no machining capabilities 
>> these are the things I have tried:
>
> Drill down the length of the key and collapse it into the hole. You'll
> need to be careful and use a good drill and a steady hand. Start off
> small and work up to just under the height/width of the key. A small
>