[SEL] Novo

[Richard Strobel]

Very nice job Dave!  Enjoyed all the great pictures and how it all came 
together.  The decal, nameplate and Wico along with the copper lines sure do 
add the finishing touch.  Hopefully one of these days I'll own a vertical 
with such class.

Again Good Job
RickinMt.
















----- Original Message ----- 
From: "Dave Ernst" <shop at cccomm.net>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Thursday, March 17, 2005 1:16 PM
Subject: [SEL] Novo


> Finished up the Novo I started earlier this year. When I first cranked it 
> up
> after purchasing it smoked terribly. After tearing it down, I didn't find
> anything terribly wrong, so I cleaned it up, gave it a ring and valve job
> and now it runs fine. I have the RPM down to less than 300, and when I 
> have
> run it some to break in the rings a little better I will see how slow I 
> can
> make it run. I'm looking for 150 to 200 RPM if that's possible.
> Pics of the project are at
> http://albums.photo.epson.com/j/AlbumIndex?u=3009545&a=31525987&vt=vp
> I bought a couple of engines at the Turlock swap meet this last weekend, a
> Monitor and an Ottawa. Their pics are at the bottom.
> Dave
>
>
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>