[SEL] FM Mdl Z Style C 3HP

[Reg Ingold]

Without seeing it, I think the shaft may be bent. It happened to a LOT of
old engines. Not too hard to straighten though. A fair amount of slack on a
bearing still wont show up as a wobble on the wheel.
Reg & Marg Ingold.
Newcastle, NSW, Australia.
randmingold at hotkey.net.au
http://www.oldengine.org/members/randmingold

----- Original Message ----- 
From: "Jim Jirik" <jimjirik at earthlink.net>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Tuesday, March 15, 2005 1:39 AM
Subject: RE: [SEL] FM Mdl Z Style C 3HP


> Can someone help me with some information on this engine I just bought.
> It's a FM Mdl Z Style C 3HP self oiling engine.  One of the, I think it's
> called,
> babbit bearings is worn and lets the left side fly wheel wobble.  I can
> move the
> crank in the bearing slightly by hand.  Is there anywhere I can go to get
a
> replacement
> bearing for this?
>
> Also, if anyone has a manual in electronic form that would be greatly
> appreciated as well.
>
> Thanks,
> Jim Jirik
> Bonner Springs, KS
> jimjirik at earthlink.net
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel