[SEL] oil slinging Witte

[John Hall]

I was afraid this was "normal". Sure makes for a messy engine.

John

----- Original Message ----- 
From: <jlb94 at juno.com>
To: <sel at lists.stationary-engine.com>
Sent: Sunday, July 24, 2005 10:40 PM
Subject: Re: [SEL] oil slinging Witte


> Hi John,
> 
> Only thoughts I have:    I have a Stover CT-1 enclosed crank.
> 
> Slings oil from the Mag side.  Comes out the corners where the gaskets
> meet.
> Also comes out the bearing cap.  
> 
> Tried several times to seal it tight.
> 
> Can't.
> 
> No matter what I do - Seems to leak.
> 
> My Advice - - - Let it leak.
> 
> 
> Joe "Pip" Betz said that. 
>