[SEL] Webster Holder

[Curt]

Webster mag experts,
Dave mentions the mag tool as "only tripping the mag about 25 degrees or 
so" as being insufficient to get a spark.
Sooo, how many degrees should a mag be turned to assure a good fat spark?

Regarding the tool being soft on the end, I've been tempted to add a 
little heat treatment to the end to make them last a good bit longer.
Curt Holland
Gastonia, NC

Dave Ernst wrote:

> Yea, I have one I bought from Ed at Hit & Miss. The metal is so soft 
> that the end is worn to the point it will only trip the mag about 25 
> degrees or so. I've been threatening to make one of those too.
> Pogonip is back this morning........
> Dave
>
>
>> Hi Dave,
>>
>> Pretty fancy rig!!  Are you aware of the Webster tripping handles 
>> that go over
>> the right hand pin on the front of the mag?  Makes testing (if you'll 
>> pardon
>> the unintended pun) a snap.  With one of those you don't even need a 
>> vice, just
>> hold the mag/ignitor on the bench with one hand, and trip it with the 
>> other.
>>