[SEL] Hercules or Economy J mixer

Glenn A Karch glenn.karch at gte.net
Wed Jan 5 07:26:45 PST 2005


Rich.

The top opening on the 3 1/4" and 3 5/8" bore engines ( 1 1/2 to 2 1/2 HP)
is 3/4" pipe.  The top opening on the 4" and 4 1/4" bore engines ( 2 1/2 to
3 1/2 HP)  is 1" pipe.

Are you going to cast these mixers around a close pipe nipple like the
originals?

Glenn

Glenn Karch
Haubstadt, IN, USA
Hercules Historian
----- Original Message -----
From: "Reed, Richard A. USNUNK NAVAIR 104, 110" <richard.a.reed at navy.mil>
To: <sel at lists.stationary-engine.com>
Sent: Wednesday, January 05, 2005 6:37 AM
Subject: [SEL] Hercules or Economy J mixer



   Can anyone give me the dimensions for the top opening of the J mixer off
of a Hercules or Economy engine. I only need the dimensions from engines 4hp
and below. I
am making models of the J mixers so I can cast some new ones. I already have
the dimensions for engines 5hp and up. Also, I am in need of a clutch pulley
for a 5hp Hercules if anyone has one they don't know what to do with .
Thanks.

  Rich Reed
Southern Maryland
_______________________________________________
SEL mailing list
SEL at lists.stationary-engine.com
http://www.stationary-engine.com/mailman/listinfo/sel




More information about the sel mailing list