[SEL] Another Economy question

[Richard Strobel]

There should be two small dimples (on the exhaust pushrod) that the 
setscrews rest in.  I assume this is to correctly position the piece in 
question.  They are on the underside.

Thanks for the compliment!  Lots of fun but now won't start..bad gas maybe.

Let me know if I can help.
RickinMt.


----- Original Message ----- 
From: <rdhaskell at juno.com>
To: <sel at lists.stationary-engine.com>
Sent: Friday, February 11, 2005 8:29 PM
Subject: Re: [SEL] Another Economy question


> Thanks for the pictures Rick.  I looked at all 49 of them, nice job.
> Glenn sent a close up picture of the piece I need.  It is a casting, I
> will try Hit & Miss tomorrow and see if they have it.  Thanks.
>
> Ron Haskell
> rdhaskell at juno.com
> Riverside, California
> USA
> http://albums.photo.epson.com/j/AlbumList?u=3009370&f=0
>
> On Fri, 11 Feb 2005 18:33:44 -0700 "Richard Strobel"
> <Richard_Strobel7 at msn.com> writes:
> > Take a look here Ron:  It's a 5hp tho so don't know about your seven.
> >  If
> > they are indeed the same, let me know and I'll do more pictures and
> >
> > measurements.
> >
> > http://community.webshots.com/photo/48249342/76454981ExJSvN
> >
> > Take care,
> > RickinMt.
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>