[SEL] Belt Dressing OT

[Cameron Grundy]

I should have known better than to go passed you Edd. (the engine
whisperer). How's the health Mate. Catchya Cam
Cam and Edwina Grundy
Kariong
Gosford   NSW
Australia
----- Original Message ----- 
From: "edd payne" <edsingns at winsoft.net.au>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Tuesday, February 08, 2005 10:44 AM
Subject: Re: [SEL] Belt Dressing OT


> I can make you one but you have to state wether you want it wider at one
end
> or thicker.The later is OK but the belt tends to bump a little.With both
> styles a good solid belt guard is recommended or have an ambulance on
> standbye.
> EDD PAYNE
> PO BOX 364 GULGONG
> New South Wales  AUSTRALIA 2852
> 0263742387
> edsingns at winsoft.net.au
> ----- Original Message -----
> From: "Cameron Grundy" <ponchie at ozemail.com.au>
> To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
> Sent: Tuesday, February 08, 2005 9:30
> Subject: Re: [SEL] Belt Dressing OT
>
>
> > Hi Dave,  Who makes them. Cam
> > Cam and Edwina Grundy
> > Kariong
> > Gosford   NSW
> > Australia
> > ----- Original Message -----
> > From: "Dave Rotigel" <rotigel at alltel.net>
> > To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
> > Sent: Tuesday, February 08, 2005 3:30 AM
> > Subject: Re: [SEL] Belt Dressing
> >
> >
> > > At 08:00 AM 2/7/2005, you wrote:
> > > >You are right Rob, but you did not consider that the pulley on a JD
B,
> is
> > > >much smaller than the puller on the grinder, so the belt is the
proper
> > size.
> > > >
> > > >J. Dave Mayfield
> > >
> > > Hi J. Dave, Perhaps you should look for a belt that is bigger on just
> one
> > end!
> > >          Dave
> > >
> > > _______________________________________________
> > > SEL mailing list
> > > SEL at lists.stationary-engine.com
> > > http://www.stationary-engine.com/mailman/listinfo/sel
> > >
> >
> >
> > _______________________________________________
> > SEL mailing list
> > SEL at lists.stationary-engine.com
> > http://www.stationary-engine.com/mailman/listinfo/sel
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>