[SEL] Belt Dressing OT

[Cameron Grundy]

Hi Dave,  Who makes them. Cam
Cam and Edwina Grundy
Kariong
Gosford   NSW
Australia
----- Original Message ----- 
From: "Dave Rotigel" <rotigel at alltel.net>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Tuesday, February 08, 2005 3:30 AM
Subject: Re: [SEL] Belt Dressing


> At 08:00 AM 2/7/2005, you wrote:
> >You are right Rob, but you did not consider that the pulley on a JD B, is
> >much smaller than the puller on the grinder, so the belt is the proper
size.
> >
> >J. Dave Mayfield
>
> Hi J. Dave, Perhaps you should look for a belt that is bigger on just one
end!
>          Dave
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>