[SEL] New Way Muffler Baffle

[Richard Strobel]

Ok thanks Tim and guys...concave towards engine then,, is the way I take it.

Tom, I forget the manu. of the anvil..will look today.  Believe the number 
was 112 which didn't work for me on the coding of an anvil.  I'll weigh it 
today..always wanted to.

Reg..will try reversing and see if the note/report is different

Thanks again guys

MERRY CHRISTMAS
Rick




----- Original Message ----- 
From: "Tim Christoff" <tchristoff at earthlink.net>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Wednesday, December 07, 2005 1:05 PM
Subject: RE: [SEL] New Way Muffler Baffle


>
> cupped side down towards the intake pipe.
>
> > [Original Message]
> > From: Richard Strobel <Richard_Strobel7 at msn.com>
> > To: sel <sel at lists.stationary-engine.com>
> > Date: 12/7/2005 8:36:45 AM
> > Subject: [SEL] New Way Muffler Baffle
> >
> >   Screwed up gang..which way does the baffle go on?
> >
> > http://community.webshots.com/photo/471752277/513755056plAhti
> >
> >
> > Thanks fer looking
> > RickinMt.
> > _______________________________________________
> > SEL mailing list
> > SEL at lists.stationary-engine.com
> > http://www.stationary-engine.com/mailman/listinfo/sel
> >
> >
> > -- 
> > No virus found in this incoming message.
> > Checked by AVG Free Edition.
> > Version: 7.1.362 / Virus Database: 267.13.11/191 - Release Date: 
> > 12/2/2005
>
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>