[SEL] Soldering galvanized question.

[peter ogborne]

Curt ...for what it is worth. Do what Ron suggests, a couple of lock nuts 
and sealing washers. I have done this on a pump and bucket ,works well and 
you can easily dismantle it .
----- Original Message ----- 
From: "kgw" <gwaugh at wowway.com>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Friday, August 12, 2005 5:34 AM
Subject: Re: [SEL] Soldering galvanized question.


>
> I have not looked, but can't you still find different "soldering acids" in 
> the stores?  If not, I have to imagine that any of the paste fluxes would 
> do the job.  Or possibly, if you don't have too much to do, acid-core 
> solder.  I think that zinc chloride or some-such is a common component in 
> such items.
> -- 
> Gene
>
> Gene Waugh
> Elgin, Illinois 60123 USA
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>
>