[SEL] update on Galloway Sawing Outfit

[Richard Strobel]

Yes Ron..now if I had these attachments, I'd be in FAT city:

http://www.lathes.co.uk/senecafalls/page5.html

Thanx
Rick


----- Original Message ----- 
From: "Ron Frost, Kersey, PA" <ron217_2000 at yahoo.com>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Tuesday, April 19, 2005 8:29 AM
Subject: Re: [SEL] update on Galloway Sawing Outfit


> Rich, Yes I did that also. Chucked it up in the lathe s turn thr outer and 
> end profiles to match the original then filed and ground the shape of the 
> tooth into the weld.
> Ron
>
> Richard Strobel <Richard_Strobel7 at msn.com> wrote:
> Ok Thanks Ron. Got plenty of time to file. Definetly need to look into a
> tig and possibly a wire welder for other old iron projects. I could forsee
> a benefit of using a lathe for dressing the tig'd gear teeth also.
>
> c'ya,
> RickinMt.
>
>
> ----- Original Message ----- 
> From: "Ron Frost, Kersey, PA"
> To: "The SEL email discussion list"
> Sent: Tuesday, April 19, 2005 4:31 AM
> Subject: Re: [SEL] update on Galloway Sawing Outfit
>
>
> > I wouldn't junk it Rick. Take it to a good weld shop and have them tig
> > weld the bad spots. Then with a Dremmel or other small grinder and a 
> > good
> > file, bring the teeth back into shape. I did this with a worn gear in an
> > old garden tractor I have and it works fine.
> > Ron
> >
> > Richard Strobel wrote:
> > Howdy all;
> > Well I got the flywheels off today and will head for Missoula in the
> > morning to get the crank straightened. I need your opinion. Should I 
> > trash
> > this crankgear? The other side is ok.
> >
> > http://community.webshots.com/photo/88886243/325803799INERIg
> >
> > TIA
> > RickinMt.
> > _______________________________________________
> > SEL mailing list
> > SEL at lists.stationary-engine.com
> > http://www.stationary-engine.com/mailman/listinfo/sel
> >
> >
> >
> > Ron Frost
> > Kersey, PA
> > http://albums.photo.epson.com/j/AlbumIndex?u=4070123&a=30427007&f=0
> >
> > http://community.webshots.com/user/ron15846
> >
> > " Collector of other peoples cultured merchandise "
> >
> >
> >
> >
> >
> > ---------------------------------
> > Do you Yahoo!?
> > Plan great trips with Yahoo! Travel: Now over 17,000 guides!
> > _______________________________________________
> > SEL mailing list
> > SEL at lists.stationary-engine.com
> > http://www.stationary-engine.com/mailman/listinfo/sel
> >
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>
>
>
> Ron Frost
> Kersey, PA
>  http://albums.photo.epson.com/j/AlbumIndex?u=4070123&a=30427007&f=0
>
>   http://community.webshots.com/user/ron15846
>
> " Collector of other peoples cultured merchandise "
>
>
>
>
>
> ---------------------------------
> Do you Yahoo!?
>  Plan great trips with Yahoo! Travel: Now over 17,000 guides!
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>