[SEL] Please critique

[John Hammink]

Curt, that's a very interesting and instructive write up you did.
I have never done this so what I read and see is new for me
and therefore I can't have any critique I thought.
It looks so easy the same as Craig shows his workmanship,
but I think I'm a little afraid to do it myselfs.
Thanks for sharing this,

John Hammink
Anna Paulowna, Netherlands.
jg.hammink at quicknet.nl



> Guys,
> As you may recall I developed some patterns for making the small 
> Herc/Econ pistons with the 3.250 bore. These are made over sized so they 
> may be fitted to oversize bored engines. Several customers have 
> requested I provide a step by step machining procedure and I decided to 
> try this pictorial version. I was hoping you might critique it and tell 
> me what I might add, change, or improve.
> Thanks for any suggestions you can offer.
> Curt Holland
> Gastonia, NC
> http://www.oldengine.org/members/holland/images/PistonMachiningSteps/Thumbnails.html
> 
> 
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel