[SEL] Unknown flywheels

[Richard Strobel]

George, I'll get some pix's up.  The flywheel faces are pretty ugly in a few 
spots.  Like they've been standing in the dirt for ????????

later,
Rick


----- Original Message ----- 
From: "Best, George" <George_Best at adp.com>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Wednesday, April 13, 2005 11:09 AM
Subject: RE: [SEL] 15 hp IHC Famous


> Rick,
>
> My friend Bill would probably be interested in those flywheels.  He's
> the guy that scratch builds big engines.  A set of flywheels and maybe a
> crankshaft is about all he needs to start a new engine.
>
> WAIT George
>
> > -----Original Message-----
> > From: sel-bounces at lists.stationary-engine.com
> > [mailto:sel-bounces at lists.stationary-engine.com] On Behalf Of
> > Richard Strobel
> > Sent: Wednesday, April 13, 2005 7:02 AM
> > To: The SEL email discussion list
> > Subject: Re: [SEL] 15 hp IHC Famous
> >
> > I've got two big flywheels that I can't ID nor use.  I know
> > the casting lettering is backwards and there's no provisions
> > for flyweights or belt pulley.  I'd swag them as 4' dia. 2.5"
> > face, ~2.5" shaft hole...no cinch bolt.
> >
> > I'll get some pix's up soon.
> >
> > RickinMt.
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > ----- Original Message -----
> > From: "John Hammink" <jg.hammink at quicknet.nl>
> > To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
> > Sent: Wednesday, April 13, 2005 6:57 AM
> > Subject: Re: [SEL] 15 hp IHC Famous
> >
> >
> > > About 10 miles from my house is a very good foundry and the
> > > guy casted a flywheel of the same dia for a big Tangey engine
> > > of one of the club members incl. machining for $2500.
> > > But the guys have a running engine now.
> > >
> > > John Hammink
> > > Anna Paulowna, Netherlands.
> > > jg.hammink at quicknet.nl
> > >
> > >
> > >
> > > >     The flywheels will be a tough on to find.  I know of
> > a couple of 15
> > > > HP's here in the US that need flywheels as well (one has
> > one flywheel,
> > > > the other broken and the other is like the one you have
> > the photo of, no
> > > > wheels at all).  Looks like somebody may have  casting
> > project in the
> > > > future.
> > > >
> > > > Tommy Turner
> > > > Magnolia, KY  USA
> > >
> > >
> > > _______________________________________________
> > > SEL mailing list
> > > SEL at lists.stationary-engine.com
> > > http://www.stationary-engine.com/mailman/listinfo/sel
> > >
> > _______________________________________________
> > SEL mailing list
> > SEL at lists.stationary-engine.com
> > http://www.stationary-engine.com/mailman/listinfo/sel
> >
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>