[SEL] Cooper..RV, Iron Horse... carburetor help.

[peter ogborne]

Hello Chester........yes i found that article . I did not help ,what i am 
doing is adjusting the fuel level in the bowl. I will finally get it right 
,just got to keep trying different levels . At the moment it is firing when 
i spin it over with a 12 v starter motor and belt drive ...just wont keep 
running.
BTW did that picture of Bobs Newway help?
----- Original Message ----- 
From: "SERVICE" <edwards_service at westnet.com.au>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Monday, April 11, 2005 3:59 PM
Subject: Re: [SEL] Cooper..RV, Iron Horse... carburetor help.


> Hi Peter,
> i recall a artical on these engines in a older issue of TOMM, if you dont
> have it let me know ill have a look.
> Cheers, Chester.
>
>
> ----- Original Message ----- 
> From: "peter ogborne" <jopeter at omninet.net.au>
> To: <sel at lists.stationary-engine.com>
> Sent: Saturday, April 09, 2005 10:33 AM
> Subject: [SEL] Cooper..RV, Iron Horse... carburetor help.
>
>
>> Please ..does any one have an elevation of the down draught carburettor 
>> on
>> these engines,i.e. the one with the overhead tank?
>> I am trying to determine the fuel level height in the float bowl having
>> rebuilt the carburettor, a new needle valve was made . A bit of guess 
>> work
>> required as to the length and the position of the float arm.
>> Thanks.......
>> Peter Ogborne
>> Little Grove ,Albany
>> West Australia
>> ''Heart of the Rainbow Coast ''
>> jopeter at omninet.net.au
>>
>>
>> _______________________________________________
>> SEL mailing list
>> SEL at lists.stationary-engine.com
>> http://www.stationary-engine.com/mailman/listinfo/sel
>
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>
>