[SEL] New Way engine

[David Nicolson]

Hi Chester , i have a 3 1/2 but it has a breather pipe on the opposite side 
to the govener up near the top of the fuel tank. it has a cap on it with an 
1/8 hole in it. Dave

>From: "SERVICE" <edwards_service at westnet.com.au>
>Reply-To: The SEL email discussion list <sel at lists.stationary-engine.com>
>To: <sel at lists.stationary-engine.com>
>Subject: [SEL] New Way engine
>Date: Tue, 5 Apr 2005 15:42:23 +0800
>
>Hi guys, i am currently restoring a vertical new way, it is a 4.5hp hinged 
>crankcase hit miss, the previous owner started restoring this and has 
>filled & painted over the fuel tank breather hole, i am trying to find 
>either pictures or a diagram of where this hole is located as i am going to 
>have to redrill it, i belive some engines had the hole on the governor side 
>& some had it on the front fuel filler side depending on build date, the 
>hole is approx 1/8 in dia ?.  Appreciate any comments, thanks.
>Chester from West Aussie.
>_______________________________________________
>SEL mailing list
>SEL at lists.stationary-engine.com
>http://www.stationary-engine.com/mailman/listinfo/sel

_________________________________________________________________
It's easy to send photos with Hotmail. Click here to find out how:  
http://www.imagine-msn.com/Hotmail/Post/Communicate/SendPhotos.aspx