[SEL] McDonald engines

[Mark Kennedy]

Hello Ray,

Welcome to the McDfratenity - where cast iron was the go along with 
strained backs!

The McDonald book says that 2087 was built in 1955.

If you want to know more, or want to add another one to your collection, 
please contact me off list!

Regards,

Mark



At 07:25 AM 4/4/2005 +0800, Ray Freeman Portable Line Boring wrote:
>I picked up two dismantled McDonald diesels on Saturday.Both are SPI's and 
>hopefully all the bits are there. Does anyone have info on these? The 
>serial number of one is 2087.  I will need a book and any other relevant 
>info available
>Ray Freeman
>_______________________________________________
>SEL mailing list
>SEL at lists.stationary-engine.com
>http://www.stationary-engine.com/mailman/listinfo/sel
>
>_______________________________________________
>SEL mailing list
>SEL at lists.stationary-engine.com
>http://www.stationary-engine.com/mailman/listinfo/sel

Mark Kennedy
Ballarat, Victoria, Australia

Registrar for the WING Gauge & Instrument Co.
http://www.oldengine.org/members/kennedy

'Training Down Under with the majesty of the South Australian Railways'

***********************************************************
Important - This email and any attachments are confidential. If received in 
error, please contact us and delete all copies. Before opening or using 
attachments check them for viruses and defects. Regardless of any loss, 
damage or consequence, whether caused by the negligence of the sender or 
not, resulting directly or indirectly from the use of any attached files 
our liability is limited to resupplying any effected attachments. Any 
representations or opinions expressed are those of the individual sender.