[SEL] Fairbanks Morse

[Edd Payne]

Hi Nick.The settings you have quoted are right and my engine does this
exactly.There are two types of ign trips for these engines .one has a
adjustable end for ign timing and the other you have to shorten or lengthen
by grinding to length or welding a little on then grinding to length.The
repo from Hit and Miss are the non adjustable type.
EDD PAYNE
PO BOX 364 GULGONG
New South Wales  AUSTRALIA 2852
0263742387
edsingns at winsoft.net.au
----- Original Message -----
From: "nick" <nick at holden1.net>
To: <SEL at lists.stationary-engine.com>
Sent: Monday, September 27, 2004 12:15
Subject: [SEL] Fairbanks Morse


> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
> Certified virus free.
>