[SEL] Sattley resoration

[Richard Strobel]

Roger that Arnie..had to burn one out on the Galloway.

  Penetrant....I like electrolysis also.  Use whatever I see on sale..PB for 
now.  Corky's using some Kroil..not sure but we may be impressed.

Good Luck
RickinMt.


----- Original Message ----- 
From: "Arnie Fero" <fero_ah at city-net.com>
To: "The SEL email discussion list" <sel at lists.stationary-engine.com>
Sent: Saturday, September 25, 2004 10:24 AM
Subject: Re: [SEL] Sattley resoration


> And worst case?  You can use the torch to burn the broken stud stub out of
> the threaded hole in the cast iron without damaging the threads.
>
> See ya,  Arnie
>
> Arnie Fero
> Pittsburgh, PA
> fero_ah at city-net.com
>
> On Sat, 25 Sep 2004 Germoamer at aol.com wrote:
>
> > transteck at earthlink.net writes:
> > <<  First question is: What is the best penetrating oil to use? >>
> >
> > You will find that there are as many opinions to the best penetrant as 
> > there
> > are brands out there.  I like Gibbs, and PB blaster.  But the best one 
> > is the
> > flame wrench!!!  Heat/cooling works wonders!
> >
> _______________________________________________
> SEL mailing list
> SEL at lists.stationary-engine.com
> http://www.stationary-engine.com/mailman/listinfo/sel
>